Power

Control

Systems, Inc.

9696 E. SAGINAW – PO BOX 164 – HASLETT, MI 48840 – 517-339-1442

TOLL FREE - 1800-968-4554

25-PAIR CATEGORY 5 ASSEMBLIES

Application

Designed for equipment and premise wiring connectivity to zone distribution cabling and backbones. 25-pair assemblies provide the same connectivity as six four pair cables, reducing installation time and hassle.

Standards Compliance

Meets all applicable standards: complies with all TIA/EIA-568-A Category 5 requirements, and meets FCC Part 68 pin-out requirements. Assembled per latest draft of Technical Systems Bulletin (TSB) ‘Transmission Specifications for UTP Patch Cords’, TIA/EIA PN-2948.

Physical Specifications

Materials: 7/23, 24 awg, Category 5 stranded UTP, Standard unshielded, RJ-21, 50-position 50-conductor Telco (RJ-21) plug with screwlock hardware, available with 90º, 180º or 110º right angle hood.

Dimensions: as specified

Typical Specification

The assemblies shall provide Category 5 performance for cross connecting Category 5 equipment and/or backbone cables to high performance Category 5 horizontal cable systems. The assemblies shall be 7/32 24 awg stranded UTP, with a standard 50 position Telco (RJ-21) plug on each end. The cords shall be available in any length.

The cords must meet the requirements of TIA/EIA-568-A and be assembled per the latest TIA/EIA draft TSB for ‘Transmission Specifications for UTP Patch Cords’. Assembly procedures dictating constant quality management regulated by 100% finished product verification prior to shipment. The manufacturer shall provide a lifetime warranty against defects in material and workmanship.